FORD 429/460 SWAP 
77/79 4X4 351/400 to 429/460 SWAP PARTS LIST
The List is for the 429 and the 78 and older 460
The 79 and up 460 is externally balanced thus requires a different fly wheel and bell housing (not a issue if you are using a automatic transmission)

1.  NORTH COUNTRY SPECIALTIES FRAME PERCHES THIS ALLOWS THE USE OF THE STOCK 1983-1997 MOTOR MOUNTS.   $225.00

    1983-1997 460 Engine plates #E8TZ6046-A  Can be bought at my online store

    1983-1997 460 Engine Insulators Napa #BK 6021688 Can be bought  at my online store


2. 1973-1987 460 TRUCK/VAN  EXHAUST MANIFOLDS (2 1/2 INCH EXHAUST) Can be bought at my online store.

3.  1983-1998 460 OIL PAN, DIPSTICK, DIPSTICK TUBE, PICKUP TUBE AND MAIN BOLT WITH STUD. Can be had at my online store

4.  1987 460 UPPER AND LOWER PULLEYS (FOR TRUCK).

5.  L&L POWER STEERING BRACKET $150.00 (needs modifying to use with A/C bracket).

6.  1970 MERCURY 429 A/C PUMP BRACKETS (IF EQUIPPED WITH A/C).

7.  429 SCJ FLYWHEEL OR 360/390 FLYWHEEL WILL WORK. Can be had at my online store

8.  DIAPHRAGM 12" PRESSURE PLATE/CLUTCH (360/390 flywheel may need to be predrilled).

9.  302 PILOT BEARING (GOES IN SECOND STEP IN CRANK).

10.  RECOMMEND SUPER COOLER RADIATOR (LARGE 3 OR 4 CORE ).

11.  LOWER HOSE FOR 79 2WD TRUCK ORDER ACCORDING TO RADIATOR SIZE.

12.  THERMOSTAT HOUSING FOR A 351/400M OR 83-98 460 TRUCK.

13.  UPPER RADIATOR HOSE FOR 1979 2wd 460.

14.  DISTRIBUTOR FROM YOUR 351/400M

15.  ENGINE WIRING HARNESS 351/400M (SENSORS ARE IN APPROX. IN THE SAME SPOT).

16.  REMOTE OIL FILTER NOT NEEDED.

17.  STARTER 351/400M.

18.  BELL HOUSING FOR 351-400M.

19.  FAN SHROUD FROM A EITHER A 2WD 460 TRUCK 73-79 OR A 360/390 TRUCK 73-76 if using a small radiator.
(Note most of these parts will work for 80-82 with 351m/400 but a remote oil filter setup is needed for anything 80-96)
(83-96 trucks/bronco need different motor mounts also ford made the frame perches and mounts for the 460 That will work from 80-96)