NORTH COUNTRY SPECIALTIES®
Instrument Cluster Adapter Plug
this plug is intended for adapting the OEM plug to use with
aftermarket Gauges like the Dakota digital Dash
it allows connection without cutting or splicing of the OEM harness
This plug use 1/8" non coated brazing rod that can be source locally
you simply cut 3/4"-1" lengths solder the wire of your choice on and slid into the groove that you want to tap
once all the taps are in place you use two part epoxy source locally to build the backing for this plug
Rod fits Nice and snug
all the taps I have chosen
mask the OEM plug to prevent the epoxy from sticking to it
mask a dam around the plug
push in the OEM plug as you would normally plug it in
Fill with epoxy to build back side of plug make sure you have all the taps you want and
they are in the proper position before doing this step
as once the epoxy dries it will be really hard to change or fix
Back to Automotive Store index